If your Mobile repair solution, you are not alone. This is one of the most common hardware issues reported by Mobile users. In this repair guide, we will show you exactly how to fix the removed broken phone glass in 5 minutes 😳 using a step-by-step method that has been tested and verified. Watch the full video tutorial below and follow the written steps carefully.
How to Fix Mobile repair solution — Step-by-Step Guide
- Power off the Mobile device completely.
- Perform a soft reset: hold Power + Volume Down for 10 seconds.
- Back up your data before attempting any repair.
- Open the device carefully using a heat gun and plastic pry tool.
- Inspect internal components for visible damage, corrosion, or loose connectors.
- Re-seat all flex cables and ribbon connectors.
- Test individual components using a multimeter.
- Replace faulty components with genuine spare parts.
- Reassemble the device and test all functions before final closure.
Tools You May Need
- Screwdriver set (Phillips & Pentalobe)
- Plastic pry tool / spudger
- Tweezers
- Multimeter (for advanced diagnosis)
- Soldering iron (if board-level repair is needed)
Important Tips Before You Start
- Always power off the device before opening it.
- Take photos before disconnecting any cables so you remember where each connector goes.
- Work on a clean, well-lit surface to avoid losing small screws.
- If the phone is under warranty, contact Mobile service centre first.
Final Words
We hope this guide helped you solve the removed broken phone glass in 5 minutes 😳 problem. If the issue persists after following all the steps, the problem may require a board-level repair or component replacement. Visit a professional mobile repair technician in that case. For more repair guides like this, browse our full repair library or subscribe to our YouTube channel for daily video tutorials.
